Your attention to these terms is appreciated.
Dealer of Record is NPS Auctions, Inc - DLR100067
Read our detailed descriptions thoroughly!We have done our best to represent our items as accurately as possible, so please keep that in mind when placing your bids.As with all auctions, the Buyer is responsible for inspecting all items prior to bidding. Items are sold as-is, where-is with no guarantees or warranties. Unless otherwise noted, all items on this auction have been previously owned and are considered used unless specifically listed as NEW or NEW OLD STOCK.
It is your responsibility to inspect prior to purchase. A ‘Test Drive’ does not equal a full mechanical inspection and will not reveal all mechanical issues. Photographs are considered part of the item description, please use all information provided to you to assess the value of this item before bidding.As with all used vehicles, any vehicle sold on auction by NPS Auctions may come with typical used vehicle issues, including minor mechanical issues and past due maintenance.By placing a bid on this auction you agree to abide by these terms.
If an item states "Tested and Works or Runs" in the description it means that the item was turned on by one of the NPS Auction Staff. It DOES NOT guarantee that the item works perfect or was tested for the exact application it is used for. Please inspect each item to know what you are buying before bidding on the item. No refunds will be given after the auction ends.
If you are unable or unsure if you'll be able to pick up or pay for your items at the close of the auction, please do not bid.
If you have specific questions about a certain lot or would like more information, don't hesitate tocontact us at 507-508-5334 between 9:00 A.M. and 5:00 P.M. Monday - Friday or email us any time at email@example.com.
Loadout times are only as listed.
Failure to pay for and pick up items at the listed load out time--whether deterred by weather, ill health, malfunctioning transportation, family emergency, act of God/Buddha/SpongeBob, or scheduling conflicts--will result in your account being marked as a no-show and will put your bidding privileges with K-BIDin jeopardy. We suggest someone else pick the items up for you in case you can't make it.
Please bring help, the proper tools, and the necessary equipment to load your items as auction staff is typically busy during loadout times. A forklift is available to assist in loading large items from the ground level. There is no charge for this service.The Auctioneer, NPS Auctions Inc., and/or the property owner are not liable for injuries or damage during removal.
Failure to load your items by the end of the auction loadout will result in a $50/hour staffing charge (minimum 1 hour), payable in cash at the time of loadout.
It is your complete and total responsibilityto ensure any and all items you won are present and accounted for in your vehicle before leaving the auction site.
Items that are not paid for with a credit card online or over the phoneby the end of the loadout datewill be considered no show and abandoned. This will jeopardize your bidding status with K-BID.
If items are paid for and have not been picked up, items are forfeited and considered abandoned.Refunds will not be given under these circumstances.
Shipping is available on items as indicated. Look for more information under the Shipping Tab.
Invoices are printed the morning after the auction ends. Double check with us if you need your items shipped to a different address other than the one on the invoice the morning after the auction. NPS Auctions cannot be held resopnsible for incorrect shipping addresses on invoices or items that are stolen after being delivered. Once they have left our facility, we cannot be held responsible for the actions of others.
Consignments are always welcome! Your site or ours. Check out our website for more information: www.SurplusMN.com
This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.
K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website. K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.
K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.
By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.
Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids.Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).
Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.
Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled. Once a bid is placed it cannot be retracted.
Sellers and their agents are prohibited from bidding on their own assets.
Items with a reserve will not be sold unless the reserve price has been met.
At the close of the auction, active items will remain open until no bids have been received for three minutes.
Applicable sales tax will be collected by the affiliate managing the auction.
In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.
Affiliates may lower a lot reserve at any time before or after an auction closes. If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice.
Once an auction begins its closing process, outbid notifications will not be sent.
Once a bid is placed it cannot be retracted.
- Bench Grinding Machine. Bench grinding machines are characterized by their bench-like shape. ...
- Belt Grinding Machine. ...
- Surface Grinding Machine. ...
- Gear Grinding Machine. ...
- Die Grinding Machine.
Three of the most common types of grinders are angle grinders, surface grinders, and die grinders.What is the price of grinder machine? ›
|Angle Grinders||Min Price||Max Price|
|Power Input - 1000 W Angle Grinders||₹2276||₹5374|
|Power Input - 1010 W Angle Grinders||₹2904||₹5985|
|Power Input - 1050 W Angle Grinders||₹1113||₹9735|
|Power Input - 1100 W Angle Grinders||₹2150||₹17124|
The number of cuts achieved with the 5” Angle Grinder were 100% greater than the 4 1/2” Angle Grinder. The 41% output power and 36% torque provided by the 5” Angle grinder, meant that the disc speed remained at its optimum, allowing the disc to work more efficiently.